This is an early design sketch of a 6m WSPR beacon. Key Points 25 MHz HCI 0.5ppm TCXO powering the Si5351 module instead of the 26 MHz TCXO. If this fails, we can use a 10 MHz OCXO instead (a bit out of spec but works fine). Tokmas CID10N65F GaN FET should work @ 50 MHz TI UCC27614 or Onsemi NCP81074 gate driver Status Results: To be built and tested soon! ...
This ~1W to ~5W WSPR beacon runs continuously on the 10m band. It handles extreme environmental temperatures pretty well (it is 42°C plus here). Our article on this beacon's design and operation will appear in the May/June 2025 issue of the QEX magazine soon. References WSPR TX by G0UPL QEX May-June 2025 TOC ...
Ismo (OH2FTG) recently introduced me to a bunch of Tokmas RF parts. Out of these, the Tokmas CID10N65F GaN FET stood out. It seems to have a lot of potential (for HF + 6m) at a very low price point. This RF MOSFET part can be purchased from LCSC. It seems Tokmas CID10N65F has the potential to completely replace the RD16HHF1 part from Mitsubishi Electric! Datasheet Datasheet excerpt: ...
I have designed, built, and tested an all-HF WSPR beacon that produces 1W @ 5V and is rugged and cost-effective. Results Power consumption: Around 420mA @ 5V. Cost Cost: Around 500 INR. Time to build Time to build: Less than 30 minutes. Files The files for this project are published here for personal (non-commercial) use. For a 5W (QRO) WSPR beacon, please stay tuned for our upcoming QEX magazine article ;) ...
I found this 60W Electronic Load to be quite useful for testing small power adapters and supplies. While it is possible to homebrew an adjustable electronic load we recommend getting this electronic load module or a better-but-costlier one like the UNI-T UTL8212+ electronic load. Observations You can stress-test power supplies using this electronic load quite easily and conveniently. It turns out that the Orange branded 12V 2A or 3A adapters from Robu are of really poor quality. The output voltage drops to less than 2V when the load current is increased to around 1A. This is NOT the first time that the Orange branded stuff has turned out to be of poor quality. In the end, you get what you pay for. ...
Tangara is an excellent project. I found this review of Tangara's design very interesting and educational. It has inspired us to build a similar FOSS DAP product but at a much lower cost of 40 USD (that being the launch price of Sansa Clip in year 2007). The idea is to deliver '90% of the value' of Tangara in a slightly smaller (but fatter) and more cost-effective package. Design Initial tech stack: RP2350-Zero, PCM5102A 32-bit 384kHz DAC, Burr-Brown OPA1662 (specified for 3.3v) as the unity gain buffer and headphone driver, no explicit DC-DC converters anywhere, microSD card, everything will be a module if possible ...
I have built what is probably the easiest, reasonably rugged, and most cost-effective 100mW WSPR (or FT8) beacon. The Build Here is my quick and dirty build with whatever I had lying around: We replaced the traditional expensive Mini-Circuits transformer with a cost-effective Bourns coupled inductor. Analysis Power consumption: Before RF generation starts ➔ 20mA @ 5V. After RF generation starts ➔ 52mA @ 5V. So the input power consumed in the RF generation process is more than 150mW (which is good). ...
The Easy WSPR Encoder can be accessed here. Update: You may find this software more useful.
Bharath and I have written our thoughts on building an RF lab on a budget. It is geared towards homebrewers and new amateur radio operators. Budget RF Lab Documentation. Have fun! :-)
The Easy FT8 Encoder can be accessed here. In the near future, we want to add the K1JT's original FT8 encoder functionality as well. Update: FT8Play is crazy good!