5V

The constraints 5V (~500mA) power from mobile phone 1W RF output required Very compact with less "moving" parts 14 MHz capable The design We use INNOTION YG401530VB MMIC in this design. 100n Si5351 CLK 0 --||----+---------+ | MMIC | | IN | | | | OUT +----||---- RF OUT ---- LPF ---- 50R dummy load +----+----+ 100nF | 10uH RFC | |---100n---GND | +5V Note: No explicit 'special' matching required it seems ;) This seems to be an extremely broadband circuit which should cover all HF! Results 10 dBm from Si5351 and 13.8 dB gain of the INNOTION MMIC gives ~9.8Vpp output theoretically. ...

The constraints 5V (~500mA) power from phone 1W RF output required Very compact with less "moving" parts 14 MHz capable The design We purposefully utilize "high Rds" EPC GaN parts with very low Qgs. Simulation Results Power consumption: Around 300mA @ 5V. pout: AVG(v(out)*i(r3))=1.0606 FROM 5e-05 TO 0.0001 pin: AVG(-5*i(v3))=1.38209 FROM 5e-05 TO 0.0001 isupply: AVG(-i(v3))=0.276418 FROM 5e-05 TO 0.0001 eff: pout/pin*100=76.7393 Cost Cost: < 500 INR. ...

I have designed, built, and tested an all-HF WSPR beacon that produces 1W @ 5V and is rugged and cost-effective. Results Power consumption: Around 420mA @ 5V. Cost Cost: Around 500 INR. Time to build Time to build: Less than 30 minutes. Files The files for this project are published here for personal (non-commercial) use. For a 5W (QRO) WSPR beacon, please stay tuned for our upcoming QEX magazine article ;) ...