Related articles: Proper Single Transistor LNA for HF A Sustainable Radio Design? We are finally going to build a QSD RX! Here is the rough schematic I am thinking about: References: https://www.n6qw.com/MC1496.html https://github.com/steve-m/hsdaoh-rp2350 (see internal_adc section) This way we can continue using RP2350 instead of moving to something like STM32H5 immediately https://github.com/dawsonjon/PicoRX/tree/master/simulations (also for DSP code)
Future radio receiver design ideas (from Ismo, Pete and other folks): Antenna ➔ (BPF) ➔ BFR93A based pre-amp from mcHF project ➔ MC1496 (Mixer) ➔ 455 kHz IF ➔ Ceramic filter SMD (HCI) ➔ 'IF amplifier' (20-40 dB gain?) ➔ Overclocked Pico 2's ADC (3+ MSPS) ➔ Digital down-conversion and processing in digital domain ➔ Expose the processed audio samples over USB (Pico 2 acts as a sound card). Benefits: This enables reception of SSB and CW signals! The 455 kHz IF with digital processing gives us the best of both analog selectivity (ceramic filter) and digital flexibility. ...
Shipping hardware internationally is a hard, labor intensive, and overall a frustrating process - especially more so these days. Here is our plan to supply the DDX to customers: Make the hardware files free / low-cost. The users will be able to order fully assembled boards from JLCPCB or other vendors on their own. Required a small licensing fee for the software firmware part. This is how we get to keep the hobby self-sustaining! ...
Circuit: DDX-Commercial-7 Antenna: Small jumper cable attached 10m: 36 dB on WSJT-X audio meter, on quiet and also with nearby beacon on !!! 12m: 36 dB on audio meter, on quiet and also with nearby beacon on !!! 15m: 46 dB on audio meter on quiet, 65 dB with nearby beacon on - OK 20m: 44 dB on quiet, 65 dB with beacon on - OK 40m: 40 dB on quiet, 60 dB with beacon on - OK ...